RV215W - no site2site vpn initialization

sleeplessormore · ‎10-10-2013

Hej :)

I am a proud owner of the RV 215w and i tried with the old and new firmware ( current 1.1.0.5) to connect to my ipsec server.

Well like recommented i disabled all ipsec security features. But i it doesnt work.

When i look at the logs from my ipsec-server router(not the rv) i cant see any incomming traffic from the rv

Is there a solution for this problem?

Btw there is no sign in the rv log that it's trying to connect to my ipsec gateway.

What shall i do?

Kremena Ivanova · ‎10-11-2013

Hi,

Can you share more details what exactly is your VPN configuration? What is the WAN port configuration - public or private IPs

Regards,

Kremena

sleeplessormore · ‎10-11-2013

Hello,

I tried to connect to my IPsec server with a configured WAN and WanMobile Port. And on each configuration the WAN Port has a public IP

It looks like that:

|-------[RouterA with a 255.255.255.252 subnet] ---[CW215W]

|

BACKBONE

|

[RouterB with NAT] ----IPsec Server (Nat-T is ON)

IPSEC configuration on CW215W:

IKE policy :Main-mode,

Enryption 3DES Authentication Alg:SHA1

DH-Group2

SA-Lifetime: Default

DPD: I tried it with ON / OFF

XAUTH:On

VPN Policy:

Autopolicy

Remote Endpoint: RouterB's IP address

Local IP Subnet:

192.168.1.0

255.255.255.0

Remote Subnet

10.0.0.0

255.255.255.0

PFS Key: I tried it with Enabled/Disabled

###

NAT-T is ON

###

Edit: Oh great now I get an error in the logs:

debug pluto[4895]: ERROR: asynchronous network

error report on vlan2 (sport=500) for message to RouterB-IP port 500, complainant RouterB-IP: No route to host [errno 148, origin ICMP type 3 code 1 (not authent

41: ERROR:

asynchronous network error report on vlan2 (sport=500) for message to

RouterB-IP port 500, complainant RouterB-IP: No route to host

[errno 148, origin ICMP type 3 code 1 (not authenticated)]

#41: ERROR:

asynchronous network error report on vlan2 (sport=500) for message to

RouterB-IP port 500, complainant RouterB-IP: No route to host

[errno 148, origin ICMP type 3 code 1 (not authenticated)]

When I try to connect with 3G I only get pluto[14399]: attempt to redefine connection "vpntest1"

and thats it...