RV320 access rules

[Tulga]

Hello? I have questions about RV320 access rules.

1. What is setting "Source interface"?

Is it interface that access rule implemented? Or is it cohered with setting "Source IP"?

2. I set Action=Deny, Service=All(1-655353), Log=No log, Source interface=WAN1, Source IP=ANY, Dest.IP=ANY, Schedule=ALWAYS. Rule number=1

WAN1 is gateway to internet.

In my opinion, all users that connected to this router can't access to internet. But users still accessing to internet. 

WHY?

I attached sample picture of my network.

[Flavio Miranda]

Hi

 Yes, source interface has the same idea of source IP.

"2. I set Action=Deny, Service=All(1-655353), Log=No log, Source interface=WAN1, Source IP=ANY, Dest.IP=ANY, Schedule=ALWAYS. Rule number=1"

"n my opinion, all users that connected to this router can't access to internet. But users still accessing to internet. "

Actually, it the opposite. You are blocking access from the internet (Considering WAN1 as your Internet exit).

[Tulga]

Thanks for your reply Miranda!

So, if I need to block all users to internet, I need to set source interface "LAN1".

Am I correct?

[Tulga · Accepted solution]

Thanks Miranda, it worked about this article.