05-23-2022 08:33 PM - edited 05-23-2022 08:34 PM
Hello? I have questions about RV320 access rules.
1. What is setting "Source interface"?
Is it interface that access rule implemented? Or is it cohered with setting "Source IP"?
2. I set Action=Deny, Service=All(1-655353), Log=No log, Source interface=WAN1, Source IP=ANY, Dest.IP=ANY, Schedule=ALWAYS. Rule number=1
WAN1 is gateway to internet.
In my opinion, all users that connected to this router can't access to internet. But users still accessing to internet.
WHY?
I attached sample picture of my network.
Solved! Go to Solution.
05-30-2022 12:51 AM
Thanks Miranda, it worked about this article.
05-24-2022 02:35 AM
Hi
Yes, source interface has the same idea of source IP.
"2. I set Action=Deny, Service=All(1-655353), Log=No log, Source interface=WAN1, Source IP=ANY, Dest.IP=ANY, Schedule=ALWAYS. Rule number=1"
"n my opinion, all users that connected to this router can't access to internet. But users still accessing to internet. "
Actually, it the opposite. You are blocking access from the internet (Considering WAN1 as your Internet exit).
05-24-2022 06:08 PM
Thanks for your reply Miranda!
So, if I need to block all users to internet, I need to set source interface "LAN1".
Am I correct?
05-30-2022 12:51 AM
Thanks Miranda, it worked about this article.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide