08-03-2015 08:30 PM
Hi,
I have this RV320 configure with VPN access and it keeps hangs in 1 day or 2 days of operation. All LEDs seems on and with WAN but it just don't route anymore. Need to power off and on again for it to last another 1 - 2 days.
Any one has this encounter before?
Best regards
Ricky
08-20-2015 09:55 PM
I had a similar problem when I upgraded the RV320 firmware to V1.2.1.13 causing the router to "hang" about once an hour. I contacted Cisco Support and the support engineer recommend that I reset the router to its default configuration and manually reconfigure it. After resetting the RV320 and manually reconfiguring the router it has been much more stable.
08-20-2015 10:07 PM
I did the same thing as you as per cisco support's advice. It still hangs but now is after 2 days+ of usage. I am still trying to isolate the problem and connecting it with bare minimum connections. I even off the incoming internet fibre line and rebooted the whole system.
Let's see how it goes over the weekend.
09-28-2015 10:17 AM
We also had this problem and I found this thread
http://www.mcbsys.com/blog/2014/10/monitor-a-cisco-rv320-using-snmp/comment-page-1/#comment-41629
After we disabled SNMP the problem went away.
YMMV
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide