03-29-2022 04:22 PM
Here in Brazil we have a VIVO Fiber provider that when connected in PPPoE Wan1 mode accuses: Connected (Inactive) and does not work properly.
What can I do to fix this?
Thank you attention!
Solved! Go to Solution.
03-31-2022 02:33 PM
I found the solution myself!
System Management > Dual WAN in the navigation tree.
Configure Interface Settings, select the WAN Interface and click Edit
Unchek the Network Service Detection
Then just hit apply.
03-30-2022 01:21 PM
This is a direct connection with ISP. If you are sure that you user and password is ok, then, you need to get them on the phone.
03-31-2022 11:41 AM
Is connected with public ip distributed! It just doesn't work as if the connection was not active.
03-31-2022 02:33 PM
I found the solution myself!
System Management > Dual WAN in the navigation tree.
Configure Interface Settings, select the WAN Interface and click Edit
Unchek the Network Service Detection
Then just hit apply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide