RV320 VPN is not routing randomly VPN gateway to gateway

[mehdi77680]

I have 2 rv320 router in differents site.

version 1.3.1.10 firmware

I have 2 wan connections in each site connected in each router

I have actived the load balancing in actif/actif mode.

I have created a VPN with the two router in gateway to gateway mode.

VPN has not be routed the flux randomly after 2 or 3 or 7 day.

when you check the status of the VPN tunnel , the status is connected from the two site

The GUI is up and all other flux has been routed .

After a reboot of the routers , the VPN come back Up and running.

Have you the same problem with the firmware version ?

Did we need to add static route on the router for the VPN subnet or is it automatic when you create the tunnel with the wizard ??

[Jorge Obregon]

Hello, 

I hope you are doing well. In case you are still having the issue I would advise you to do a downgrade to 1.2.1.14 first  since that firmware version 1.3.1.10 had some issue that are being fixed this is to avoid any issues relating the firmware release. 

Regards,