10-11-2019 01:04 PM - edited 10-11-2019 01:12 PM
Hello,
I have reconfigured the router many times and everything works fine until first reboot. VPN is no longer working no matter what I am trying.
Error in log is: Tunnel Authorize Fail - no connection has been authorized with policy=AGGRESSIVE+XAUTHPSK+XAUTHSERVER
VPN is configured as EasyVPN with full tunnel.
If I do factory default and configure again, VPN works again until first reboot.
Firmware version is 1.4.2.22
Any idea?
Many thanks.
Solved! Go to Solution.
10-14-2019 11:28 AM
Hi all,
I have no contract for support, therefore I got no help.
Anyhow, I have downgrade the firmware to 1.2.1.14 and evrything works fine. I can connect to VPN after the restart, I have checked also with IPhone.
Firmware version 1.3.2.02 does not work either. I do not know if one of the version 1.4.x.x will work, but I will not try anymore.
Solution: Downgrade to 1.2.1.14 if you want EasyVPN to work.
Thanks
10-11-2019 01:17 PM
looks odd as per the description you have mentioned here.
please do contact SMB support, they can investigate for you.
https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
10-11-2019 01:53 PM
10-14-2019 11:28 AM
Hi all,
I have no contract for support, therefore I got no help.
Anyhow, I have downgrade the firmware to 1.2.1.14 and evrything works fine. I can connect to VPN after the restart, I have checked also with IPhone.
Firmware version 1.3.2.02 does not work either. I do not know if one of the version 1.4.x.x will work, but I will not try anymore.
Solution: Downgrade to 1.2.1.14 if you want EasyVPN to work.
Thanks
01-04-2021 06:05 AM
I too had this issue.
Nothing I did, including rebuild from backup, resolved my issue.
I deleted all gateway - gateway VPN's all to no avail.
I was running the latest firmware 1.5.1.11.
What I did to get it working was downgrade to 1.4, then upgrade back to 1.5.
After that, all VPN's connected
01-06-2021 09:04 AM
No,chance. I have tried the same and it does not work.
I have now 1.5.1.13 firmware and I switched to OpenVPN. EasyVPN configuration does not work for firmware 1.5.1.13 when you use an Iphone Xs to connect to router.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide