RV325 VPN Not Working

[luiz.oliveira]

Hello,

It has two Cisco RV325 devices both with the IPSec VPN configuration enabled and configured, but when I click on "connect" on them the message "waiting" and back to the "connect" option appears. I have reviewed all the settings and I have the latest firmware version. Also I tested the public IPs and they are correct. Is there anything that can be done?

Attach my device's VPN settings.

If you can help I'll be very grateful.

Best Regards.

[refrainfrombeinglame]

What IPSEC-VPN client are u using?

Also i wouldn't use a 768 bit DH-group for key-exchange,  DES for encryption and MD5 for Auth, those settings are not secure.

You should use Group 5 as a DH-Group,  AES-128 or better for encryption and SHA-1 for Auth.

[refrainfrombeinglame]

What IPSEC-VPN client are you using?

Also i wouldn't use a 768 bit DH-group for key-exchange,  DES for encryption and MD5 for Auth, those settings are not secure.

You should use Group 5 as a DH-Group,  AES-128 or better or encryption and SHA-1 for Auth.