Routers - Small Business

I had an RV220W   and RV180W vpn tunnel setup and if the tunnel dropped it would rebuild it. The RV320 that replaced the dead RV220W is not rebuilding the Tunnel I have to log in tell it to connect again. What settings am I missing? I read about Dead...

Downloaded the latest 1.0.0.29 firmware for my RV134W and upgraded it few days ago.  Today was notified by Dyn.com that my DNS hostname was blocked due to excessive updates.  Checked the Dyn.com website Host Update Logs and indeed the RV134W is sendi...

Hi, in the Moment we have an Cisco 876 in Place and we made a line upgrade from 2Mbit ADSL to a VDSL2 100Mbit/40Mbit Line. We recognized, that the Router isn´t able handle the line speed capabilities. We only achieve 18Mbit up+down maximum, the CPU ...

Firmware Version:v1.3.2.02 (2016-09-23, 15:17:06) About once a week our VPN (Gateway-Gateway) link goes down undetected by the RV320 on each end. Disconnect and Connect fails to work and the router must be restarted. The second problem is System M...

Hello, I just bought a VPN router, RV325. I'm not an IT professional so, I have a strange question. The router has 2 WAN ports with 7 LAN ports on each. From my ISP I have a subnet class of IPs, something like: - main IP: x.x.x.x / 255.255.255.128 wi...

Hi all,Not very experienced at this. Recently purchased a refurbished 2921 router from a cisco reseller.I am currently trying to ssh into the router through the console port using a crossover cable, however, I am unable to find the host name. I tried...

Morning all! I'm having trouble setting this unit up correctly.I need to configure WAN1 for LAN1 port in bright mode ON a (VLAN1)And WAN 2 for ports LAN 2/3/4 on a (VLAN2)But I still can not configure WAN1 in Brige mode with LAN1

I have been tackling this problem for a month but couldn't figure it out. Hope I can get some help in here. Running the latest firmware of RV320 (v1.2.1.13) Setup EasyVPN on the router and trying to connect via Android 5.1.1 native. However, I am get...

I have a Cisco RV325 router. I'm not able to telnet to port 80 for the server on the DMZ port. Why can't I telnet to port 80 ? Here is what I've done: Connect IIS server to DMZ portThis server has an internal static IP of 192.168.3.70Turned off Windo...

I have the latest firmware (v1.3.2.02) for my RV325. There are 4 devices connected to it, but, I have simplified the problem down to a single device. However, I've tried configuring all devices the same way to no avail. And, I need all 4 devices to w...

Hello, It has two Cisco RV325 devices both with the IPSec VPN configuration enabled and configured, but when I click on "connect" on them the message "waiting" and back to the "connect" option appears. I have reviewed all the settings and I have the ...

HI All, I'm trying to configure an RV215W VPN Firewall for remote access.  The QuickVPN is only for Windows computers.  Is it possible to securely connect from any other devices?  I have the options for creating accounts for QuickVPN or PPTP and not...

Hi Folks, Our new RV325 was installed yesterday, with Firmware version 1.3.1.12. It was connected to WAN and LAN successfully. Today we decided to upgrade to the latest firmware before configuring VPN access.  We downloaded RV32X_v1.3.2.02_2016092...