Dear Community,
I came across a shortage of the RV340 that is rather shocking but I hope the reason is my lack of technical knowledge.
I set up two VPN tunnels to one ASA.
First connects the local RV340 Network 192.168.1.0/24 to the remote ASA network 10.10.110.0/24
Second connects the RV340 Network to the remote ASA network 10.10.200.0/24
Both tunnels work well but I can not set up the RV340 to use both tunnels at the same time.
Reason is the remote identifier.
The RV340 can not use the same ISKAMP remote identifier for two different tunnels.
This is the error message I get.
From my understanding creating two tunnels to the same Endpoint only varying the remote subnet should work without any extra effort.
Please correct me if I am missing something.
Also grateful for workarounds or solutions.
There has been a discussion about this issue a year ago but still no real solution.
rv345p-multiple-subnets-in-site-to-site-vpn