08-09-2021 07:01 AM
Hello All,
I need help to configure Two ISP configuration on Cisco L3 Switch, i have 60 User so it should be devide 50-50 %,
Please help me to configure it be low is my configuration and rougly draw diagram
ip route 0.0.0.0 0.0.0.0 XX.XX.XX.246
ip route XX.XX.XX.131 255.255.255.255 XX.XX.XX.130
ip route XX.XX.XX.144 255.255.255.248 XX.XX.XX.130
ip routing
interface 1/1
name "to_isp"
exit
interface 1/2
name "TO_ISP_02"
no power-over-ethernet
exit
interface 1/21
disable
name "to_FW_INTER_02"
exit
interface 1/22
name "to_FW-Inter_02"
exit
interface 1/23
name "to_FW_INTER_01"
exit
interface 1/24
name "to_FW_INTER_01"
exit
ip address 10.203.131.57 255.255.255.0
ip default-gateway 10.203.131.1
member 1
ip address dhcp-bootp
exit
exit
vlan 3010
name "ISP_01_WAN_100"
untagged 1/1
tagged 1/21-1/24
ip address 172.24.204.245 255.255.255.252
exit
vlan 3011
name "ISP_01_100M"
untagged 1/5
tagged 1/3-1/4,1/12,1/21-1/24
ip address 117.205.9.129 255.255.255.248
exit
vlan 3012
name "ISP_TCL_WAN_200"
untagged 1/2
tagged 1/21-1/24
ip address 123.252.253.82 255.255.255.252
exit
vlan 3013
name "ISP_TCL_LAN_200M"
tagged 1/21,1/23
ip address 114.143.50.65 255.255.255.240
exit
08-10-2021 12:58 AM
- The drawing doesn't seem to include a cisco device , you may go here :
https://community.hpe.com/t5/Aruba-ProVision-based/bd-p/switching-e-series-forum
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide