VLAN on a WAN port of RV325 Cisco Routers

[Steph' RMS]

Hi,

I want to tag my WAN1 port with at least one VLAN. Indeed my ISP using multiple VLANs (data, VoIP, ...) and unfortually VLAN data is not the native VLAN. :(
Is this feature in the firmware roadmap of RV325? Or how Small Business Routers have this option?

Thanks

[Eric Guesney]

Hi,

I'm intesting too by this capability.

Any idea of an ETA for this option ?

Thanks.

EG

[NunoGuerra]

I just solved the problem: bought a Draytek 2925

[Steph' RMS]

Thanks you.

I TEMPORARILY solved this problem by using this tips :

WAN1 ----> LAN14 (untagged VLAN 123)  and LAN13 (tagged VLAN 123) ----> ISP

[SunnyJi]

Hello Steph' RMS

I have a Cisco RV325. and have the same probelm. Would you please share with me how did you do this?

WAN1 ----> LAN14 (untagged VLAN 123)  and LAN13 (tagged VLAN 123) ----> ISP

For example Did you use a cable to connect WAN to LAN 14?

VLAN 2 and VLAN 3 doesnt exist.

VLAN1 doesnt allow you to chang from untagged(default) to tagged.

I will really appreciate your help.

Thank you in advance.

SunnyJi

[Savvi]

Did you solved?

I have the same problem, my ISP needs VLAN 835

Thank you

[SunnyJi]

Nope not solved. I came to understand that the router doesn't support such
a function. It would be great if anyone has a solution

[Savvi]

I  tried to do this connection but it does not work at all (it is not possible to connect to the router anymore)

created the VLAN 835 (my ISP)

set port 7 as tagged

set port 14 as untagged

connect port 14 to WAN

connect ISP cable to Port 7