Hi,
Am planning to setup a tunnel between 2 locations, in a way systems can be connected from either of the sides.
So, in one location setup internet through Linksys x1000
this will connect to CVR100W router.
Similar setup in other location also.
This is the IP values,
Location A
Static IP - XXX.XXX.XXX.XXX
DSL Modem - 192.168.1.1
Router - 10.10.10.1
WAN - 192.168.1.125
Location B
FQDN - abc.ddns.net
DSL Modem - 192.168.2.1
Router - 10.10.11.1
WAN - 192.168.1.100
But am struggling to setup the Tunnel with this. Could you please help on this?
Regards,
Vimal.
