06-06-2024 05:36 AM - edited 06-06-2024 05:58 AM
Hi,
My provider is going IPV6 only - but I would still like to use IPV4 in my LAN.
The IPV6 prefix changes every 24 hours from my ISP.
So my question is.....
Can an ISR900 do IPV4-to-6 and VPN(IPSec/SSL) and Firewalling (ZBF or similar) at the same time?
or....would a Cisco Firepower 1010 do this better?
Solved! Go to Solution.
06-06-2024 06:11 AM
Hello @frazreid2
As concerned ISR900 series:
If your primary concern is advanced security and high-performance VPN capabilities, the Cisco Firepower 1010 would likely be the better choice due to its comprehensive security features and robust VPN performance. However, if you need a more versatile device that provides solid routing, VPN, and basic security capabilities, the Cisco ISR900 could be sufficient and might offer more flexibility in terms of routing and network management.
06-06-2024 06:11 AM
Hello @frazreid2
As concerned ISR900 series:
If your primary concern is advanced security and high-performance VPN capabilities, the Cisco Firepower 1010 would likely be the better choice due to its comprehensive security features and robust VPN performance. However, if you need a more versatile device that provides solid routing, VPN, and basic security capabilities, the Cisco ISR900 could be sufficient and might offer more flexibility in terms of routing and network management.
06-06-2024 06:24 AM
You Need NAT for this case it called NAT64
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide