02-01-2016 04:05 PM
I have a rv042-g, which apparently doesn't support DP. DP is required to get subnets to link your local LAN ipv6 addresses to the Internet.
(If there is a manual way to set this up, I haven't found it).
I plan on returning or selling the rv042-g once I find a better router.
Solved! Go to Solution.
02-02-2016 02:23 AM
Looking through this thread would suggest it is supported on rv042 but not the rv180
https://supportforums.cisco.com/discussion/11629126/does-rv180w-support-dhcpv6-pd
SMB team may be able to tell you which specific version of fw its on
http://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
02-02-2016 02:23 AM
Looking through this thread would suggest it is supported on rv042 but not the rv180
https://supportforums.cisco.com/discussion/11629126/does-rv180w-support-dhcpv6-pd
SMB team may be able to tell you which specific version of fw its on
http://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
02-02-2016 12:12 PM
We finally read through all the help file, and finally found the instructions.
Wasn't searchable.
Doc was pretty scant on details, but I had one of the Comcast ipv6 guys helping me.
Working now.
Thanks for the help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide