10-03-2011 11:27 PM - edited 03-04-2019 01:49 PM
Hi
I've been looking and I can really find much info about this, I got a 1841 and 2801 router with ADSL WIC cards and both are synching really low compared to my cheap home router
This leads me to believe I need a firmware update so I got the adsl_alc_20190.bin and loaded it into flash and reloaded my router but its still saying my firmware is using an embedded one.
Can some one please point me into the right direction for a firmware update and what its called?
sh flash:
-#- --length-- -----date/time------ path
1 1000636 Oct 4 2011 05:59:54 +00:00 adsl_alc_20190.bin
sh dsl interface atm0/1/0
ATM0/1/0
Alcatel 20166/20174 chipset information
ATU-R (DS) ATU-C (US)
Modem Status: Showtime (DMTDSL_SHOWTIME)
DSL Mode: ITU G.992.1 (G.DMT) Annex A
ITU STD NUM: 0x01 0x1
Vendor ID: 'ALCB' 'BDCM'
Vendor Specific: 0x0000 0x544D
Vendor Country: 0x0F 0xB5
Capacity Used: 99% 97%
Noise Margin: 6.0 dB 8.0 dB
Output Power: 20.0 dBm 12.0 dBm
Attenuation: 54.0 dB 31.5 dB
Defect Status: None None
Last Fail Code: None
Watchdog Counter: 0x55
Watchdog Resets: 0
Selftest Result: 0x00
Subfunction: 0xA1
Interrupts: 4055 (0 spurious)
PHY Access Err: 0
Activations: 1
LED Status: ON
LED On Time: 100
LED Off Time: 100
Init FW: embedded
Operation FW: embedded
FW Version: 13.101
Interleave Fast Interleave Fast
Speed (kbps): 2912 0 800 0
Cells: 243 0 102482 0
Reed-Solomon EC: 2 0 0 0
CRC Errors: 0 0 0 0
Header Errors: 0 0 0 0
Bit Errors: 0 0
BER Valid sec: 0 0
BER Invalid sec: 0 0
LOM Monitoring : Disabled
DMT Bits Per Bin
000: 0 0 0 0 0 0 0 6 8 9 A B B B C C
010: C C C C C C C C C C C C B B 0 0
020: 0 0 0 0 0 0 5 6 6 7 7 8 8 8 9 9
030: 9 9 9 9 9 9 9 8 8 8 7 7 8 2 7 7
040: 7 7 6 6 6 6 6 5 5 5 5 5 5 5 5 5
10-05-2011 07:51 PM
bump so im trying to find a firmware update for:
Alcatel 20166/20174
Can any one help?
10-05-2011 11:02 PM
The firmware you've been trying is for a different ADSL chipset and HWIC so that's why it won't load.
It looks like you've got a WIC-1ADSL-I-DG or WIC-1ADSL-DG and, according to
http://www.cisco.com/en/US/prod/collateral/routers/ps221/prod_bulletin0900aecd801d5c4c.html, firmware
13.101, which you're running, seems like the latest.
10-09-2011 08:51 PM
Thanks for clearing that up for me , i am now synching with a Billion Router and ive bridged it to my 1841 so i can get better sync speeds
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide