2620XM frame relay switch

[gavin han]

Hi,

I've to configure 2620XM router as a frame replay switch. I need 8 interfaces on it. which module should I use?

I'll have other 7 routers connect to it using DB60 cross over cable. 6 of those routers will have WIC-2T card while 1 router will have  NM-4A/S card.

[acampbell]

Gavin,

If you can source it, you could use an NM-8A/S.

However you will only be able

to reach speeds upto 128K per interface

Regards,
Alex.
Please rate useful posts.