3745 Router Memory Cards

[csteinman]

How do I know if I have one 128 MB memory card or two 64 MB memory cards in a 3745 router without physically opening it up? Is there an IOS command that will tell me? Any tricks to finding this out from other commands?

[jackyoung]

Check here to determine if it works for you :

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_command_reference_chapter09186a00800ca742.html

You can try "sh flash: all" & "sh flash: chips". Please advise the result.

Hope this helps.

[csteinman]

My co-worker next to me found the answer. It is 'show platform'. Gives you data on the Dimms in each slot, and if one is empty, it tells you so. Pretty handy for planning memory upgrades!

[jolmo]

Hi Curtis

According to: http://www.cisco.com/en/US/products/hw/routers/ps282/prod_module_installation_guide09186a008007e3cb.html#wp168876

it has one 128 MB DIMM since two 64 MB DIMMs is a non allowed configuration.

Hope this helps

[sales]

try Sh diag & sh ver for slot & memory info

geoff

www.simondirect.com