09-28-2010 08:36 AM - edited 03-05-2019 06:43 AM
We purchased an 3925 with a 16 port Gig SM module installed.
When I boot up router, those interfaces do not show up.
Do I have to do anything special to enable those interfaces to be seen on router.
(The 4th Gig interface show up as GI1/0, but I don't know where it is physicall located; possibly the SM Module itself ??)
Pertinent IOS information:
System image file is "flash0:c3900-universalk9-mz.SPA.150-1.M3.bin"
Cisco CISCO3925-CHASSIS (revision 1.1) with C3900-SPE100/K9 with 997376K/51200K bytes of memory.
Processor board ID FTX1434AJU9
4 Gigabit Ethernet interfaces
1 ATM interface
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 72 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
500472K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 C3900-SPE100/K9 FOC14314JJ5
Technology Package License Information for Module:'c3900'
----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
-----------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
uc None None None
data None None None
Configuration register is 0x2102
Thanks for any help.
Tom
Solved! Go to Solution.
09-28-2010 03:16 PM
Cisco Enhanced EtherSwitch Service Modules Configuration Guide
09-28-2010 03:16 PM
Cisco Enhanced EtherSwitch Service Modules Configuration Guide
09-29-2010 03:54 AM
Exactly what I was looking for. Thanks. Tom
09-29-2010 04:43 AM
Thanks for the rating.
04-07-2019 09:18 AM
I get a policy error when trying to view the link. I have a 2951 with same problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide