09-25-2013 06:14 PM - edited 03-04-2019 09:09 PM
Current 1 connection with this config
interface Port-channel4
no ip address
!
interface Port-channel4.40
description 10.10.40.0/24_VoIP
encapsulation dot1Q 40
ip address 10.10.40.1 255.255.255.0
ip pim sparse-dense-mode
!
interface Port-channel4.901
description Layer3 connection to hq-3750e
encapsulation dot1Q 900
ip address 172.16.10.1 255.255.255.252
interface GigabitEthernet0/1
description Connection to hq-3750e-ms_1/0/1
no ip address
duplex full
speed 1000
media-type rj45
no keepalive
channel-group 4
Want to have the redundancy with vlan 40 on another interface ( g0/2 to 37502_ms 2/0/1), just wonder if 3945 can do port-channeling or able to do hsrp with another built-in interface
Any input is being appreciated.
09-25-2013 10:05 PM
Why do you want to do it in this why, why don't you configure point to pint connections instead of vlan?
I
Sent from Cisco Technical Support iPhone App
09-26-2013 08:34 AM
Have only 1 interface to connect to a stack so no redundancy. Will have another interface open soon so want to have L3 redundancy between 3945 and the stack and Voice vlan 40.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide