09-24-2014 05:47 PM - edited 03-04-2019 11:49 PM
Hi all,
We just upgraded the IOS on our SUP7L-E supervisor in a 4507R+E from a non-k9 (crypto) image to a k9 (crypto) image so we could use SSH to manage it. The specific image we are using is: cat4500e-universalk9.SPA.03.04.04.SG.151-2.SG4.bin. We also have a pair of 2960CG-8TS-L's that are running on: c2960c405ex-universalk9-mz.152-2.E.bin. We have given the devices new hostnames and specified a domain according to instructions.
Our problem seems to be that we cannot use the "crypto key generate rsa" command to generate the keys we need to use SSH. We use this command all the time on our other 2960 and 4510 switches with no problems. We can issue other "crypto" commands but just cant generate the keys. Has anyone else experienced/fixed this problem? <!--break-->
09-24-2014 10:59 PM
Switch#crypto key generate rsa modulus ? <360-4096> size of the key modulus [360-4096]
I am running IOS version 3.5.3E and I can regenerate the key using the command "crypto key generate rsa modulus" command.
02-22-2017 05:05 PM
you have to configure terminal then issue the command.This command appears in privileged mode also. The crypto key generate rsa appears under config t mode.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide