Hi all!
Can you help to determine the resone of failure?
Here is the the log:
Dec 19 15:16:11: %MFIB_PLTF-DFC3-3-TABLE_HANDLE_BAD: Range. 0x0 -Process= "mfib-const-lc Process", ipl= 0, pid= 211
-Traceback= 20B5F344 20B5B020 20C0A90C 20BECD28 20BCC75C 20BCE494 20BC1868 20BC1FE8 20B1DA9C 20BC20B4 20BDD364 20BCDD24 20BF9ED4
Dec 19 15:22:39: %MFIB_PLTF-DFC3-3-ENTRY_HANDLE_BAD: Range. 0x0 -Process= "mfib-const-lc Process", ipl= 0, pid= 211
-Traceback= 20B5F4CC 20B5B3F4 20C0A520 20BECD14 20BCC75C 20BCE494 20BC1868 20BC1FE8 20B1DA9C 20BC20B4 20BDD364 20BCDD24 20BF9ED4
Dec 19 15:22:39: %MFIB_PLTF-DFC3-3-TABLE_HANDLE_BAD: Range. 0x0 -Process= "mfib-const-lc Process", ipl= 0, pid= 211
-Traceback= 20B5F344 20B5B020 20C0A90C 20BECD28 20BCC75C 20BCE494 20BC1868 20BC1FE8 20B1DA9C 20BC20B4 20BDD364 20BCDD24 20BF9ED4
Dec 19 15:22:53: %MFIB_PLTF-DFC3-3-ENTRY_HANDLE_BAD: Range. 0x0 -Process= "mfib-const-lc Process", ipl= 0, pid= 211
-Traceback= 20B5F4CC 20B5B3F4 20C0A520 20BECD14 20BCC75C 20BCE494 20BC1868 20BC1FE8 20B1DA9C 20BC20B4 20BDD364 20BCDD24 20BF9ED4
Dec 19 15:22:53: %MFIB_PLTF-DFC3-3-TABLE_HANDLE_BAD: Range. 0x0 -Process= "mfib-const-lc Process", ipl= 0, pid= 211
-Traceback= 20B5F344 20B5B020 20C0A90C 20BECD28 20BCC75C 20BCE494 20BC1868 20BC1FE8 20B1DA9C 20BC20B4 20BDD364 20BCDD24 20BF9ED4
Dec 19 15:23:09: %MFIB_PLTF-DFC3-3-ENTRY_HANDLE_BAD: Range. 0x0 -Process= "mfib-const-lc Process", ipl= 0, pid= 211
-Traceback= 20B5F4CC 20B5B3F4 20C0A520 20BECD14 20BCC75C 20BCE494 20BC1868 20BC1FE8 20B1DA9C 20BC20B4 20BDD364 20BCDD24 20BF9ED4
Dec 19 15:23:09: %MFIB_PLTF-DFC3-3-TABLE_HANDLE_BAD: Range. 0x0 -Process= "mfib-const-lc Process", ipl= 0, pid= 211
-Traceback= 20B5F344 20B5B020 20C0A90C 20BECD28 20BCC75C 20BCE494 20BC1868 20BC1FE8 20B1DA9C 20BC20B4 20BDD364 20BCDD24 20BF9ED4
Dec 19 15:23:31: %MFIB_PLTF-DFC3-3-ENTRY_HANDLE_BAD: Space. 0x20BE3FAC -Process= "XDR mcast", ipl= 0, pid= 217
-Traceback= 20B5F4CC 20B5AFCC 20C0AB34 20BE9398 20BEA534 20BE924C 2165192C 21650FCC
Dec 19 15:23:34: %MFIB_PLTF-DFC3-3-TABLE_HANDLE_BAD: Range. 0x0 -Process= "mfib-const-lc Process", ipl= 0, pid= 211
-Traceback= 20B5F344 20B5B020 20C0A90C 20BECD28 20BCC75C 20BCE494 20BC1868 20BC1FE8 20B1DA9C 20BC20B4 20BDD364 20BCDD24 20BF9ED4
Dec 19 15:24:08: %CPU_MONITOR-SP-6-NOT_HEARD: CPU_MONITOR messages have not been heard for 31 seconds [3/0]
Dec 19 15:24:38: %CPU_MONITOR-SP-6-NOT_HEARD: CPU_MONITOR messages have not been heard for 61 seconds [3/0]
Dec 19 15:25:08: %CPU_MONITOR-SP-6-NOT_HEARD: CPU_MONITOR messages have not been heard for 91 seconds [3/0]
Dec 19 15:25:24: %XDR-6-XDRIPCNOTIFY: Message not sent to slot 3/0 (3) because of IPC error timeout. Disabling linecard. (Expected during linecard OIR)
Dec 19 15:25:38: %CPU_MONITOR-SP-6-NOT_HEARD: CPU_MONITOR messages have not been heard for 121 seconds [3/0]
Dec 19 15:26:08: %CPU_MONITOR-SP-6-NOT_HEARD: CPU_MONITOR messages have not been heard for 151 seconds [3/0]
Dec 19 15:26:39: %PIM-5-NBRCHG: neighbor 172.16.3.9 DOWN on interface Vlan129 non DR
Dec 19 15:26:39: %PIM-5-NBRCHG: neighbor 172.16.3.18 DOWN on interface Vlan397 DR
Dec 19 15:26:38: %CPU_MONITOR-SP-3-TIMED_OUT: CPU_MONITOR messages have failed, resetting module [3/0]
Dec 19 15:26:38: %OIR-SP-3-PWRCYCLE: Card in module 3, is being power-cycled off (Heartbeat Messages Not Received From Module)
Dec 19 15:26:39: %C7600_PWR-SP-4-DISABLED: power to module in slot 3 set off (Heartbeat Messages Not Received From Module)
Dec 19 15:26:44: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.4.2 on Vlan22 from FULL to DOWN, Neighbor Down: Interface down or detached
Dec 19 15:26:44: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.4.3 on Vlan22 from FULL to DOWN, Neighbor Down: Interface down or detached
Dec 19 15:26:44: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.4.4 on Vlan22 from FULL to DOWN, Neighbor Down: Interface down or detached
Dec 19 15:26:44: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.4.5 on Vlan22 from FULL to DOWN, Neighbor Down: Interface down or detached
Dec 19 15:26:44: %OSPF-5-ADJCHG: Process 1, Nbr 172.16.4.30 on Vlan22 from FULL to DOWN, Neighbor Down: Interface down or detached
Dec 19 15:27:03: %IPMCAST_RPF-4-RPF_LOOKUP_LOOP: RPF route lookup loop for 10.6.15.135
Dec 19 15:27:07: %BGP-5-ADJCHANGE: neighbor 83.229.132.217 Down Interface flap
Dec 19 15:27:07: %BGP_SESSION-5-ADJCHANGE: neighbor 83.229.132.217 IPv4 Unicast topology base removed from session Interface flap
Dec 19 15:27:37: %BGP-5-ADJCHANGE: neighbor 83.229.193.41 Down Interface flap
Dec 19 15:27:37: %BGP_SESSION-5-ADJCHANGE: neighbor 83.229.193.41 IPv4 Unicast topology base removed from session Interface flap
*Mar 1 00:00:02.191: BaseBoard Index:152
*Mar 1 00:00:02.763: DaughterBoard Index:221 (Distributed Forwarding Card 3)
Firmware compiled 30-Apr-10 19:08 by integ Build [100]
Dec 19 12:28:30.256: %SYS-DFC3-5-RESTART: System restarted --
Cisco IOS Software, c6lc2 Software (c6lc2-SP-M), Version 12.2(33)SRE2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Thu 05-Aug-10 20:01 by prod_rel_team
Dec 19 12:28:30.280: DFC3: Currently running ROMMON from S (Gold) region
Dec 19 15:28:39: %DIAG-SP-6-RUN_MINIMUM: Module 3: Running Minimal Diagnostics...
Dec 19 15:29:04: %DIAG-SP-6-DIAG_OK: Module 3: Passed Online Diagnostics
Dec 19 15:29:09: %OIR-SP-6-INSCARD: Card inserted in slot 3, interfaces are now online
Cisco7609#sh ver
Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 12.2(33)SRE2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Thu 05-Aug-10 20:01 by prod_rel_team
ROM: System Bootstrap, Version 12.2(33r)SRD5, RELEASE SOFTWARE (fc1)
BOOTLDR: Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 12.2(33)SRE2, RELEASE SOFTWARE (fc1)
Cisco7609 uptime is 4 days, 15 hours, 32 minutes
Uptime for this control processor is 4 days, 15 hours, 32 minutes
System returned to ROM by power cycle (SP by power on)
System restarted at 13:09:48 MSK Wed Dec 15 2010
System image file is "bootdisk:c7600rsp72043-adventerprisek9-mz.122-33.SRE2.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html you require further assistance please contact us by sending email to
export@cisco.com. CISCO7609-S (M8500) processor (revision 1.0) with 1900544K/131072K bytes of memory.
Processor board ID FOX1417GET5
BASEBOARD: RSP720
CPU: MPC8548_E, Version: 2.0, (0x80390020)
CORE: E500, Version: 2.0, (0x80210020)
CPU:1200MHz, CCB:400MHz, DDR:200MHz,
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
If
Cisco
Last reset from power-on
85 Virtual Ethernet interfaces
98 Gigabit Ethernet interfaces
3964K bytes of non-volatile configuration memory.
507024K bytes of Internal ATA PCMCIA card (Sector size 512 bytes).
Configuration register is 0x2102
