cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
420
Views
0
Helpful
1
Replies

866VAE reboots every 20-30 minutes

sonnenuntergang
Level 1
Level 1

                   My new small router 866vae crashes and makes cold reboots every 20-30 minutes. I updated IOS, but it didn't help. The logs show texts like this:

--------------------------------------------------------------------

   Possible software fault. Upon reccurence, please collect

   crashinfo, "show tech" and contact Cisco Technical Support.

--------------------------------------------------------------------

-Traceback= 0x808A0980z 0x808A4E90z 0x8089E2B4z 0x808AD350z 0x8086F000z 0x80A3B7A0z 0x80A1D444z

$0 : 00000000 00000000, AT : 00000000 83B90000, v0 : 00000000 00010E00, v1 : 00000000 00000001

a0 : 00000000 83D85ADC, a1 : 00000000 00000000, a2 : 00000000 00000000, a3 : 00000000 0000000E

t0 : 00000000 00000000, t1 : 00000000 83D85ADC, t2 : 00000000 FFFFF0FD, t3 : 00000000 8087A544

t4 : 00000000 1000F001, t5 : 00000000 00000000, t6 : 00000000 00000000, t7 : 00000000 00000000

s0 : 00000000 83D85ADC, s1 : 00000000 00000001, s2 : 00000000 00000000, s3 : 00000000 B0F8D184

s4 : 00000000 00000000, s5 : 00000000 83D85ADC, s6 : 00000000 00000000, s7 : 00000000 836C0000

t8 : 00000000 83BD0000, t9 : 00000000 80A2AE78, k0 : 00000000 00000000, k1 : 00000000 00000000

gp : 00000000 83B954E0, sp : 00000000 84049970, s8 : 00000000 0000FFFF, ra : 00000000 808ABF18

EPC  : 808ABF40, ErrorEPC : 00000000, SREG     : 00000000

MDLO : 00000000, MDHI     : 00010E00, BadVaddr : 00000000

TEXT_START : 0x8080BF84

DATA_START : 0x82D655C0

Cause 00000000 (Code 0x0): Interrupt exception

17:44:06 UTC Fri May 24 2013: Interrupt exception, CPU signal 5, PC = 0x808ABF40

It happens only if I am in Internet. Without internet I can play with configuration many hours without reboot. The configuration is:

Building configuration...

Current configuration : 4341 bytes
!
! Last configuration change at 17:47:54 UTC Fri May 24 2013 by admin
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Cisco866VAE
!
boot-start-marker
boot system flash:/c860vae-ipbasek9-mz.153-2.T.bin
boot-end-marker
!
!
logging buffered 51200 warnings
no logging console
!
no aaa new-model
wan mode dsl
no ip source-route
no ip gratuitous-arps
!
!
!
!
!
!
ip domain name home.intern
ip name-server 208.67.222.222
ip name-server 208.67.220.220
ip cef
no ipv6 cef
!
!
!
!
username admin privilege 15 secret 4 x9oLE.8RfkNCfWJ.SRJxiM1JURePOCyuuv8Tnyuo0Hc
!
!
controller VDSL 0
operating mode adsl2+
!
!
!
!
!
interface ATM0
no ip address
no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
pvc 1/32
  pppoe-client dial-pool-number 1
!
!
interface Ethernet0
no ip address
shutdown
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
no ip address
!
interface FastEthernet2
no ip address
!
interface FastEthernet3
no ip address
!
interface GigabitEthernet0
no ip address
shutdown
duplex auto
speed auto
!
interface Vlan1
description $ETH_LAN$
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
!
interface Dialer0
ip address negotiated
ip access-group 111 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
no keepalive
ppp authentication chap callin
ppp chap hostname XXXXXXXXXXXXXXXXXXXX
ppp chap password 0 XXXXXXXXXXXX
ppp ipcp dns request
ppp ipcp mask request
ppp ipcp route default
no cdp enable
!
no ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
ip dns server
ip nat inside source list 101 interface Dialer0 overload
!
dialer-list 1 protocol ip permit
mac-address-table aging-time 15
no cdp run
!
access-list 23 permit 192.168.1.0 0.0.0.255
access-list 101 permit ip 192.168.1.0 0.0.0.255 any
access-list 111 permit udp any eq bootps any eq bootpc
access-list 111 permit tcp any any
access-list 111 permit udp any any
access-list 111 permit icmp any any echo-reply
access-list 111 permit icmp any any time-exceeded
access-list 111 permit icmp any any unreachable
access-list 111 permit icmp any any administratively-prohibited
access-list 111 permit icmp any any echo
access-list 111 permit gre any any
!
control-plane
!
!
line con 0
login local
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet
!
scheduler allocate 60000 1000
!
end

1 Reply 1

paolo bevilacqua
Hall of Fame
Hall of Fame

Wrong forum, post in "infrastructure - WAN and routers". You can move your post using the actipons panel on the right.

Review Cisco Networking for a $25 gift card