Re: 887 VDSL not synching Need help:

PATRICK DUPONT · ‎02-16-2011

Hello All,

I have configured the "ISP" part of the VDSL as i am a tech for the ISP that has access to this, but i am not able to get my 887V to synch is there something i am doing wrng within the Cisco, i have included a debug and couple more things .. just have no clue why this is not working.

Thank You Pat

887V#sh debugging

VDSL 0 daemon:

VDSL daemon error condition debugging is on

VDSL daemon interface function debugging is on

VDSL daemon state machine debugging is on

VDSL VDSL 0 ipc:

VDSL IPC error debugging is on

VDSL IPC Rx debugging is on

VDSL IPC Tx debugging is on

VDSL VDSL 0 mbx:

VDSL mailbox error debugging is on

VDSL mailbox Rx debugging is on

VDSL mailbox Tx debugging is on

VDSL 0 training log:

VDSL training log is on

*Feb 16 17:24:07.259: VDSL 0: vdsl line state : discovery

*Feb 16 17:24:07.259: VDSL 0: SM_LINE_TRAIN boolean event

*Feb 16 17:24:07.259: vdsl_daemon_sm VDSL 0: during state training, got event 17(line_training)

*Feb 16 17:24:07.259: @@@ vdsl_daemon_sm VDSL 0: training -> training

*Feb 16 17:24:13.271: ipc VDSL 0: vdsl_notif_interrupt, Sending LINE_STATE to VDSL Daemon, state = 7

*Feb 16 17:24:13.271: VDSL 0: vdsl line state : fullinit

*Feb 16 17:24:15.299: VDSL 0: SM_LINE_DOWN boolean event

*Feb 16 17:24:20.019: mbx VDSL 0: vdsl_msg_rcv_isr, Desc@ 604 : hdr= E004, total len= 28, msg len= 28, @618

*Feb 16 17:24:20.019: mbx VDSL 0: vdsl_msg_rcv_isr, Notification msg type 4, len= 28

*Feb 16 17:24:20.019: mbx VDSL 0: vdsl_process_msg_rcv, First message (1) : addr= 0x618, dest= 0x0xEE010E0, len= 28 00x 04x 11x 02x 00x 127x 00x 127x 00x 64x 4294967201x 4294967184x 00x 00x 00x 00x 42x

*Feb 16 17:24:20.023: 4294967243x 4294967204x 4294967280x 00x 00x 00x 00x 00x 00x 00x 00x

*Feb 16 17:24:20.023: mbx VDSL 0: vdsl_process_msg_rcv, Last message (2) : addr= 0x618, dest= 0xEE010FC, len= 28

*Feb 16 17:24:20.023: mbx VDSL 0: vdsl_msg_rcv_complete, call msg 4 rx handler, err= 0, len= 28, 0xEE010E0

*Feb 16 17:24:50.059: mbx VDSL 0: vdsl_msg_rcv_isr, Desc@ 60E : hdr= E004, total len= 28, msg len= 28, @618

*Feb 16 17:24:50.059: mbx VDSL 0: vdsl_msg_rcv_isr, Notification msg type 4, len= 28

*Feb 16 17:24:50.059: mbx VDSL 0: vdsl_process_msg_rcv, First message (1) : addr= 0x618, dest= 0x0xEE010E0, len= 28 00x 04x 11x 02x 00x 127x 00x 127x 00x 64x 4294967201x 4294967184x 00x 00x 00x 00x 42x

*Feb 16 17:24:50.059: 4294967243x 4294967204x 4294967280x 00x 00x 00x 00x 00x 00x 00x 00x

*Feb 16 17:24:50.059: mbx VDSL 0: vdsl_process_msg_rcv, Last message (2) : addr= 0x618, dest= 0xEE010FC, len= 28

*Feb 16 17:24:50.059: mbx VDSL 0: vdsl_msg_rcv_complete, call msg 4 rx handler, err= 0, len= 28, 0xEE010E0

*Feb 16 17:24:55.307: ipc VDSL 0: vdsl_notif_interrupt, Sending LINE_STATE to VDSL Daemon, state = 8

887V#sh controllers vdsL 0

Controller VDSL 0 is DOWN

Daemon Status: Establishing Link

XTU-R (DS) XTU-C (US)

Chip Vendor ID: 'BDCM' 'IKNS'

Chip Vendor Specific: 0x0000 0x0100

Chip Vendor Country: 0xB500 0xB500

Modem Vendor ID: 'CSCO' 'IKNS'

Modem Vendor Specific: 0x4602 0x0100

Modem Vendor Country: 0xB500 0xB500

Serial Number Near: FHK1415724TCISCO731141205

Serial Number Far:

Modem Version Near: 15.0(1)M

Modem Version Far: 0x0100

Modem Status: Idle

DSL Config Mode: AUTO

Trained Mode:

TC Mode: PTM

DELT configuration: enabled

DELT state: in progress

Trellis: OFF OFF

Full inits: 0

Failed full inits: 0

Short inits: 0

Failed short inits: 0

Firmware Source File Name (version)

-------- ------ -------------------

VDSL user config flash:vdsl.bin.A2pv6C016a1.d22e.IOS1501M1 (10)

Modem FW Version: 100204_1318-4.02L.01.A2pv6C016a1.d22e0

Modem PHY Version: A2pv6C016a1.d22e0

Training Log : Started

Training Log Filename : flash:vdsllog.bin

887V#show diag 0

Slot 0:

C887VDSL2 Mainboard Port adapter, 6 ports

Port adapter is analyzed

Port adapter insertion time unknown

EEPROM contents at hardware discovery:

Chassis MAC Address : 68ef.bd69.512e

PCB Serial Number : FO6140901M7

Hardware Revision : 1.0

Processor type : B4

Part Number : 73-11412-05

Board Revision : A0

Deviation Number : 0

Fab Version : 04

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

MAC Address block size : 14

Chassis Serial Number : FHK1415724T

Product (FRU) Number : CISCO887V-K9

Version Identifier : V01

Radio Country Code : FFFF

Top Assy. Part Number : 800-31524-01

CLEI Code : VAMLE10CRA

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF C3 06 68 EF BD 69 51 2E C1 8B 46 4F 36 31

0x10: 34 30 39 30 31 4D 37 40 06 4D 41 01 00 09 B4 82

0x20: 49 2C 94 05 42 41 30 88 00 00 00 00 02 04 03 00

0x30: 81 00 00 00 00 04 00 43 00 0E C2 8B 46 48 4B 31

0x40: 34 31 35 37 32 34 54 CB 92 43 49 53 43 4F 38 38

0x50: 37 56 2D 4B 39 20 20 20 20 20 20 89 56 30 31 20

0x60: D9 03 40 C1 C2 4A FF FF C0 46 03 20 00 7B 24 01

0x70: C6 8A 56 41 4D 4C 45 31 30 43 52 41 FF FF FF FF

0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x1A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x1B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x1C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x1D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x1E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x1F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

887V#

Giuseppe Larosa · ‎02-16-2011

Hello Pat,

have you got a different VDSL modem that is able to synchronize?

VDSL performances are influenced by line conditions, the line may be too bad for it or there is a problem of interoperability with CO.

you should contact who is providing the VDSL service ( it not clear if it is a different company or a different group in your company)

Hope to help

Giuseppe

PATRICK DUPONT · ‎02-17-2011

Hello Giuseppe,

have you got a different VDSL modem that is able to synchronize?----> No I Do not.

VDSL performances are influenced by line conditions, the line may be too bad for it or there is a problem of interoperability with CO.-----> This is fine i am les then .5km from the remote Co with VDSL E.Q

you should contact who is providing the VDSL service ( it not clear if it is a different company or a different group in your company)---->This is within the company i work in,so all the stasts for the LINE are fine.. i even brought my Router to the D-mark outside to see is it worked No luck..

This si how the ISP side is Configured for VDSL:

PTM encap = 64-65

Upbo = auto

band plan 998

U0 Band a-25-183

line code vdsl2

region = annex A

profile p12a

trellis encoding and bit swapping are on.

card is a stigner VDSL2-IK-GEB

So th Question remains, does the Cisco 887VDSL need to have configuration with in the cisco for it Synch up???

PATRICK DUPONT · ‎02-25-2011

Anybody have an answer to this by any chance.. ?