I'm a bit stuck with an issue on an ASA 5505. Basically I'd like to set up RADIUS auth for a VPN, but the AAA server resides on the internet on a public ip such as 22.214.171.124.
Internally, there's another router with two ISPs connected into it, each with 4 public IPs. The router does NAT and provides an internal network 192.168.1.0.
The Cisco ASA has the interfaces configured as follows:
outside -> 192.168.1.0/24 (connected to the router, and using a few ips of that network for network translation purposes of machines on the internal network)
inside -> 192.168.85.0/24 (where all the clients are)
guests -> 192.168.2.0/24
Now, if I set up the AAA server on interface outside, and the IP above, it won't be reachable, as confirmed by the packet tracer. I tried a lot of things, adding static routes, static nat rules, but nothing seems to work, and I'm sure I'm missing something really basic.
Join us live on Tuesday, March 9 at 10 am PT (and on demand after) as we take a closer look at the WAN architecture innovations that Cisco has to offer.
We'll take your questions live during the broadcast (and after), so post them below in the comments.
Hello everybody,I am newbies with setting cisco switch.I downloaded Catalyst 2960-X Switch Getting Started Guide but I can't access to Device Manager - Express Setup according to guide.If you follow the instructions and try to keep all LEDs (exc...
To participate in this event, please use the button to ask your questions
Ask questions from Monday, March 8 to Friday, March 19, 2021
All the knowledge of these four experts at your disposal!
Cisco Software-Defined Wide Area Network (SD-WAN) provid...
Community Live- ISR1100X-4G and ISR1100X-6G Platform Overview and Architecture
(Live event - Tuesday, 23 March, 2021 at 10:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)-
This event will have place on Tuesday 23rd, March 2021 at 10:00 hrs PDT&...