09-13-2018 04:40 AM - edited 03-05-2019 10:55 AM
Hi all
I have a question regarding to cisco router C800 series
we have an old router and have old configuration and now we want to use this router again
I have tried to access to mode level Router> but I couldn't and I keep receiving this messages
Solved! Go to Solution.
09-13-2018 04:45 AM
The link below explains how to reset the configuration or get into the router not knowing the old password.
https://www.cisco.com/c/en/us/support/docs/routers/800-series-routers/12065-pswdrec-827.html
09-13-2018 04:45 AM
The link below explains how to reset the configuration or get into the router not knowing the old password.
https://www.cisco.com/c/en/us/support/docs/routers/800-series-routers/12065-pswdrec-827.html
09-13-2018 04:53 AM
Thanks for your reply
The problem is I can't access to user EXEC mode and the privilege mode it's not appear in the screen of putty
So I can't do anything
09-13-2018 04:56 AM - edited 09-13-2018 04:57 AM
The steps above relate to ROMMON, which is accessed immediately after power-on. There is not notion of EXEC. Just enter the commands as they appear in the referenced document.
cheers,
Seb.
09-13-2018 11:09 PM
Thanks a lot guys. The problem is solved
I have followed the steps and it was so helpful thanks again
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide