06-21-2012 09:47 AM - edited 03-04-2019 04:44 PM
hi im trying to set up my cisco lab to access the internet through my virgin home router,i have turned on modem mode and it gives my router 1 an ip add,i have also set up nat with overload,i also see the route in my routing tables of other routers. frim pc 3 that is right across the other side of the network i can ping 4.2.2.2 but not google.com,from my r1 which is the router connected to my modem i can ping 4.2.2.2 and google.com no problem,and when i do sh ip nat translations it shows the nat working,but non of the pcs can get any web pages.also have default route to internet interface,no other access-lists just the nat any ideas
also from all pcs i can type in ip add into web browser and access the site,on each router i have done the command ip name server 4.2.2.2
thanks tewy
Sent from Cisco Technical Support iPhone App
Solved! Go to Solution.
06-21-2012 11:33 AM
Hi Chris,
Are your PCs able to use a DNS server, did you set a DNS server on ur PCs or have the option set, in case of using DHCP server for addressing?
plz Rate if it helped,
Soroush.
06-21-2012 12:17 PM
from the pc, can you ping to 8.8.8.8 ? if yes, then try to change your dns to this ip. its google's dns
regards,
06-21-2012 10:12 AM
hi Chris,
would you mind giving us the network diagram? it'll help a lot.
regards,
06-21-2012 10:25 AM
hi can u give me the ip add of these forums as using the pcs for the lab an not sure how to add diagram through iphone,with the ip address i can access the forums on pc then and add the diagram and any show commands needed
Sent from Cisco Technical Support iPhone App
06-21-2012 10:30 AM
06-21-2012 10:33 AM
hi no i mean the actual ip address it seems to be with the dns as if i type google.com i get cant find server but if i type 173.194.34.160(google.com s ip add)i can access the page
thanks chris
Sent from Cisco Technical Support iPhone App
06-21-2012 10:55 AM
will reset up pcs an post diagram
thanks
Sent from Cisco Technical Support iPhone App
06-21-2012 11:33 AM
Hi Chris,
Are your PCs able to use a DNS server, did you set a DNS server on ur PCs or have the option set, in case of using DHCP server for addressing?
plz Rate if it helped,
Soroush.
06-21-2012 12:09 PM
hi i hadnt setup dns on the pcs but after u replied i setup dns on pc to isp dns and secondary dns 4.2.2.2 but it still doesnt work
thanks chris
Sent from Cisco Technical Support iPhone App
06-21-2012 12:17 PM
from the pc, can you ping to 8.8.8.8 ? if yes, then try to change your dns to this ip. its google's dns
regards,
06-21-2012 12:25 PM
hi no i think theres somthing else goin on now as i cant ping trace or access using ip addresses anymore,will try get it back how it was and try ur suggestions,will rate if i suss it and ask if i dont thanks for all your help
thanks chris
Sent from Cisco Technical Support iPhone App
06-21-2012 12:34 PM
hi guys thanks for all your help it was i hadnt set up dns on pcs
thanks chris
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide