12-07-2005 01:00 AM - edited 03-03-2019 11:10 AM
Hello members :)
Strange thing. see:
I wanted to route internet traffic from branch through dedicate router behind HQ router. For this reason I tried to implement route-map on HQ router's incomming serial interface, with ACL matching source adress of branch.
branch ----->serial 4/0:0 HQ router -------> My destination Router
GW.HQ#
!
access-list 75 permit 10.12.5.0 0.0.0.255 //LAN branch
!
route-map Internet-Branch permit 10
match ip address 75
set ip default next-hop 10.50.1.1 //Address of my Destination router. I would like to forward all traffic that matches ACL 75 with NO EXPLICIT ROUTE on HQ to 10.50.1.1
!
!
interface Serial4/0:0
description Liberec ## TR1193 ##
bandwidth 2048
ip address 10.9.5.1 255.255.255.252 //ptp GW.HQ - branch
ip policy route-map Internet-Branch
fair-queue
!
ACL happily match traffic, but the route-map do not work correctly. I fear to use extensive debug on HQ router..
Did anyone see a hole in the scenario?
wish you find the right X-Mass gift without loosing nerves in hypermarkets :)
Zdenek
12-07-2005 02:13 AM
Hi,
Well I think you didn't turn on
"ip route-cache policy" on your incoming
interface (interface serial4/0:0)
Try "ip route-cache policy" command in interface mode.
Andras
12-07-2005 02:39 AM
Very helpful Horvaia.. I break through HG router now. I am sending you 5 and thanks once more
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide