10-31-2018 08:55 AM - edited 03-05-2019 11:01 AM
Hi,
I’m a little rusty with QOS, and wondered if someone can offer some advice on how I’d configure it.
The customer are using a CISCO ASR 1001 router, with a 4GB mpls.
I want to configure QOS to give priority to packets with a DSCP value of 46, but not assigned a percentage of bandwidth, just allow priority over other traffic.
At the moment there is traffic policing on the router but nothing else.
Any help would be greatly appreciated.
10-31-2018 11:47 AM
Hello
You could apply LLQ so has to give priority to dscp 46 and also apply some fair queuing to any default traffic and shape your wan interface to 4
class-map match-all dscp46
match ip dscp ef
policy-map child
class dscp46
priority 3072000
class class-default
fair-queue
policy-map parent
class class-default
shape average 40980000
service-policy child
int x/x
description WAN
service-policy output parent
11-01-2018 01:02 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide