ASA Config -- extra entries added automatically after config loads?????

[djgriggs1]

asa5516 added the following entries to the running-config ( how , where from ) this was not part of the config...

This should not be there it was not part of the config template that was created.

 policy-map type inspect dns migrated_dns_map_1
  parameters
    message-length maximum client auto
    message-length maximum 512
    no tcp-inspection

 policy-map global_policy
   inspect dns migrated_dns_map_1
   inspect ftp
   inspect tftp

 following lines were entered by asa
      policy-map type inspedct dns migrated_dns_map_2
         parameters
           message-length maximum client auto
           message-length maximum 512
           no tcp-inspection

[Karsten Iwen]

That was probably part of the factory-default config. You have to remove/modify it based on your needs.

[djgriggs1]

Karsten,  

I am loading my Config to startup-Config. Which seems to work on the ads 5515 with no issue.

so I would not think that it would add in with my loaded config

[djgriggs1]

After further research it appears that the ads is setting a default policy even after I load a config. Working on how to prevent this and load what is in the config file only