ASR 1000 IOS

[drolemc]

Does Cisco IOS XE Software use the same command-line interface (CLI) as Cisco IOS Software?

[mheusing]

Hi,

The ASR 1000 CLI will be similar to other IOS versions. But as always, there will be platform specific commands (like e.g. for a GSR) and minor differences. 3800 series routers and Catalyst 6500 both use IOS, yet you might find several differences in commands and features being available. So do not expect that you can copy and paste a 3800 or 6500 configuration into an ASR 1000 without any hickup :-)

Regards, Martin

[krachunov]

Hi,

I want to ask when will be available Software Configuration Guide for ASR 1000 IOS XE?

Thanks!

Momchil

[zakid]

Can you please confirm to me is the below steps  is the right steps to upgrade ASR 1002&1006

and why we need to add /auto/tftp-users/user why not the IOS only as like normal upgrade for 6500 series

/auto/tftp-users/user/asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin

Router# dir bootflash:

Directory of bootflash:/

11 drwx 16384 Dec 4 2007 04:32:46 -08:00 lost+found

86401 drwx 4096 Dec 4 2007 06:06:24 -08:00 .ssh

14401 drwx 4096 Dec 4 2007 06:06:36 -08:00 .rollback_timer

28801 drwx 4096 Mar 18 2008 17:31:17 -07:00 .prst_sync

43201 drwx 4096 Dec 4 2007 04:34:45 -08:00 .installer

13 -rw- 45977 Apr 9 2008 16:48:46 -07:00 target_support_output.tgz.tgz

928862208 bytes total (712273920 bytes free)

Router# copy tftp bootflash:

Address or name of remote host []? 172.17.16.81

Source filename []?

/auto/tftp-users/user/asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin

Destination filename [asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin]?

Accessing

tftp://172.17.16.81//auto/tftp-users/user/asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bIN

Loading /auto/tftp-users/user/asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin from

172.17.16.81 (via GigabitEthernet0):

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!

[OK - 208904396 bytes]

208904396 bytes copied in 330.453 secs (632176 bytes/sec)

Router# dir bootflash:

Directory of bootflash:/

11 drwx 16384 Dec 4 2007 04:32:46 -08:00 lost+found

86401 drwx 4096 Dec 4 2007 06:06:24 -08:00 .ssh

14401 drwx 4096 Dec 4 2007 06:06:36 -08:00 .rollback_timer

28801 drwx 4096 Mar 18 2008 17:31:17 -07:00 .prst_sync

43201 drwx 4096 Dec 4 2007 04:34:45 -08:00 .installer

12 -rw- 208904396 May 28 2008 16:17:34 -07:00

asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin

13 -rw- 45977 Apr 9 2008 16:48:46 -07:00 target_support_output.tgz.tgz

928862208 bytes total (503156736 bytes free)

Router# config t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#boot system flash

bootflash:asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin

Router(config)#config-reg 0x2102

Router(config)#exit

Router#show run | include boot

boot-start-marker

boot system flash bootflash:asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin

boot-end-marker

Router# copy run start

Destination filename [startup-config]?

Building configuration...

[OK]

Router# reload

[Leo Laohoo]

Copy the IOS into the ASR's bootflash.

[zakid]

Router# copy tftp bootflash:

Address or name of remote host []? 172.17.16.81

Source filename []?

/auto/tftp-users/user/asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin

Destination filename [asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin]?

Accessing

tftp://172.17.16.81//auto/tftp-users/user/asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bIN

Loading /auto/tftp-users/user/asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin from

172.17.16.81 (via GigabitEthernet0):

Why i need to add the below line

/auto/tftp-users/user/asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin

or just put only the IOS

asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin without

/auto/tftp-users/user/

please confirm to me