05-29-2021 10:25 PM
Hi
Checking the ASR1000 Scaling for the maximum no. of supported IPOE sessions on the box, I found the following link:
The table on the page just shows PPP and L2TP sessions. I wonder what is the value of IPoE sessions.
My scenario does not have DHCP, Just monitoring IP traffic.
Would you please guide me in this regard?
Thank you
Peyman
Solved! Go to Solution.
08-04-2021 05:39 AM
Hi Peyman,
You can check the below url:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iwag/configuration/xe-16/IWAG_Config_Guide_BookMap/iwag-scal-perf.html
Thanks a lot,
Islam
08-04-2021 05:39 AM
Hi Peyman,
You can check the below url:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iwag/configuration/xe-16/IWAG_Config_Guide_BookMap/iwag-scal-perf.html
Thanks a lot,
Islam
08-24-2021 02:47 AM
Thank you for sharing info...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide