cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
420
Views
0
Helpful
1
Replies

Asr 9006 | Unable to Bundle 100G

TrivialPants
Beginner
Beginner

Hi All,

 

I have an ASR 9006 that I am unable to bundle to

100G bundle-ether



I have tried the following:

int bundle-ether 32
	100G
	mtu 2012


int hu0/0/0/3
	100G Port Member
	mtu 2012
	bundle id 32 mode active
	bundle port-priority 32601
	cdp 

I get an error when I attempt to commit the changes:

interface HundredGigE0/0/0/3
bundle id 32 mode active

 

 

 


!!% Bundle membership configuration conflicts with underlying interface configuration (either already existing or also present in the same commit).

Conflicting: /mtu/HundredGigE
!
end



 

The MTUs match, so I'm not sure what the conflict it is noting is referencing. 

 

 

When I did some searching, I found this: https://bst.cloudapps.cisco.com/bugsearch/bug/CSCux02557?rfs=iqvred

 

 

1 Accepted Solution

Accepted Solutions

TrivialPants
Beginner
Beginner

Replying with a solution - I thought I had already tried this. 

I removed MTU from both the main interface as well as the bundle, then re-added the port to the bundle successfully.

 

Thanks!

View solution in original post

1 Reply 1

TrivialPants
Beginner
Beginner

Replying with a solution - I thought I had already tried this. 

I removed MTU from both the main interface as well as the bundle, then re-added the port to the bundle successfully.

 

Thanks!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers