Our client has 2 ASR1001-x routers with IOS-XE sr1001x-universalk9.03.13.02.S.154-3.S2-ext.SPA.bin.
I can configure the clock summer-time:
clock summer-time BE recurring last Sun Mar 2:00 last Sun Oct 3:00
However I can't configure the clock timezone. When I enter the configuration rule "clock timezone BE 1 0" the router doesn't complain but afterwards this configuration rule doesn't appear in the configuration and the clock isn't adapted:
RT00BDCE1EX1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
RT00BDCE1EX1(config)#clock timezone BE 1 0
RT00BDCE1EX1(config)#exit
RT00BDCE1EX1#sho run | inc clock
clock summer-time BE recurring last Sun Mar 2:00 last Sun Oct 3:00
RT00BDCE1EX1#sho clo
11:58:32.032 BE Thu Apr 23 2015
RT00BDCE1EX1#
NTP is configured and is working properly:
RT00BDCE1EX1#sho ntp asso
address ref clock st when poll reach delay offset disp
*~10.136.13.217 10.136.2.83 3 39 1024 377 3.991 2753.49 1.116
+~10.136.13.125 10.136.2.83 3 337 1024 377 3.990 2748.64 1.093
* sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ configured
RT00BDCE1EX1#
Is this a bug ? Is there a new way to configure the right timezone? Thanks in advance.
Best regards
Mike
