Our client has 1600 switches installed of the type WS-C2960X-24PS-L.We did an image upgrade from IOS 15.2(4)E to 15.2(4)E7 (done by Prime).Unfortuantely we encountered several problems:1) 2% didn't start up. They were blocked on "POST : Thermal, Fan ...

In our network we have routers installed of the type ISR4331/K9 and ISR4331-B/K9. First of all we can't find what the difference is between both routers. Furthermore the routers of the type ISR4331/K9 are manageable in Prime 3.4 (OID 1.3.6.1.4.1.9.1....

Is it possible somehow to update PSIRT/EOX information in Prime 3.0 "offline" (with NO INTERNET connecttion). Security doesn't allow management platforms to have Internet connection so automatically update of PSIRT/EOX information in our Prime 3.0 in...

We want to use auto smartport for detecting the connection of AIR-CAP2702I-E-K9 devices in order to change the values on the interface (access-vlan number , ..) on a WS-C2960X-24PS-L switch. This was tested in a POC environment with three AIR-CAP2702...

We're receiving EIGRP cEigrpNbrDownEvent  traps from ASR1001-X router with IOS-XE asr1001x-universalk9.03.13.02.S.154-3.S2-ext.SPA.bin.Our management platform however doesn't understand those traps because they are not defined in the CISCO-EIGRP-MIB....