Hello,
we have recently installed an ASR1001X running asr1001x-universalk9.03.16.02.S.155-3.S2-ext.SPA.bin.
What we noticed is that the
access-lists
used for QoS do not show counters, even though traffic seems to be matched when running
show policy-map interface x
sh policy-map int Gi0/0/2
GigabitEthernet0/0/2
Service-policy output: POLICY-PREC
Class-map: CLASS-PREC (match-any)
16653903 packets, 3239916215 bytes
5 minute offered rate 123000 bps, drop rate 0000 bps
Match: access-group name MF
Match: protocol snmp
Match: protocol telnet
Match: protocol ssh
Match: access-group name SYNK3
Match: access-group name Silver
Queueing
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 16654021/3239935003
QoS Set
precedence 3
Marker statistics: Disabled
bandwidth 3000 kbps
Class-map: class-default (match-any)
57582260 packets, 56322798416 bytes
5 minute offered rate 899000 bps, drop rate 0000 bps
Match: any
queue limit 4166 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 57529228/5631814630
Any suggestions?
Thank you in advance,
Katerina
