07-29-2005 07:20 AM - edited 03-03-2019 10:09 AM
Hi. I've never configured ATM, so I want to run it by the best. What I'm doing is using two T1s bundled to make 3.072 of bandwidth for my atm link. I have two pvcs to my main hub sites, one going to boston, one to nyc. I am the remote site.
This is my initial config. Am I missing anything major?? I've never done this.
interface ATM1/0
no ip address
no atm ilmi-keepalive
ima-group 0
no scrambling-payload
!
interface ATM1/1
no ip address
no atm ilmi-keepalive
ima-group 0
no scrambling-payload
######other ATM interfaces - not used#########
interface ATM1/IMA0
bandwidth 3072
no ip address
no atm ilmi-keepalive
!
interface ATM1/IMA0.16 point-to-point
description Primary PVC to Boston
ip address 10.10.10.1 255.255.255.248
ip summary-address eigrp 1 0.0.0.0 0.0.0.0 175
ip policy route-map nachi-worm
delay 2000
ipx network Z148062
pvc bo6rtr01-7513-1 1/16
vbr-nrt 1536 1536
oam-pvc manage
encapsulation aal5snap
max-reserved-bandwidth 100
service-policy output qospolicy_768
!
!
interface ATM1/IMA0.17 point-to-point
description Secondary PVC to West NYC
ip address 10.10.11.2 255.255.255.248
ip summary-address eigrp 1 0.0.0.0 0.0.0.0 175
ip policy route-map nachi-worm
delay 2000
ipx network Z447249
pvc NYC6rtr01-7513-1 1/17
vbr-nrt 1536 1536
oam-pvc manage
encapsulation aal5snap
max-reserved-bandwidth 100
service-policy output qospolicy_768
Also. I am missing something major in the config - THE ABILITY TO CREATE A VLAN INTERFACE. I've never seen anything like it. I do a conf t, type int the ?, and vlan isn't an option. WTF!!
Thanks for looking at this.
lee
07-29-2005 11:53 PM
Hello Lee,
the config looks ok, basically. About the VLAN interface, what platform and IOS are you running (e.g. 2621XM with 12.3) ?
Regards,
GP
08-01-2005 05:36 AM
GP, Thanks!!
I am running (C2691-ADVENTERPRISEK9-M), Version 12.3(15a) on a 2691. Thanks. I assume I need a switching module, but I'm not sure how I get it, or what it is.
Thanks,
Lee
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide