Greetings, i have a 2811ISR with two HWIC-1ADSL Cards installed, each ATM and Dialer interface is in their own respective dialer groups, every day or so one of the WIC cards becomes stale and i have to shut the atm interface then bring it back up and all is fine again.
Ive been unable to trace the problem but would for the time being like to automate this process using a script.
All i need to do is schedule the following commands to occur once a day.
!interface atm0/1/0
!shutdown
!no shutdown
Could anyone point me in the direction of an example please.
Regards
