06-15-2020 07:23 AM - last edited on 12-21-2023 01:27 AM by Translator
Hi Guys.
Im do a lab bgp on EVE and it Im tryed config a vrf. But display the error below. What can be causing error?
R7(config-router)#address-family ipv4 vrf BLUE
% Invalid address family ipv4 unicastvrf(0x1) BLUE
Solved! Go to Solution.
06-15-2020 08:10 AM - last edited on 12-21-2023 01:34 AM by Translator
The issue happens because you have not enable address-family ipv4 under vrf definition.
vrf definition BLUE
address-family ipv4
exit-address-family
Regards,
06-15-2020 07:26 AM
Hello @LincolnR ,
check the name of the vrf you may have configured vrf BLU for example and you are attempting to configure a non existing vrf.
Hope to help
Giuseppe
06-15-2020 07:50 AM - last edited on 12-21-2023 01:33 AM by Translator
Giuseppe,
Apparently the VRF name is the same.
vrf definition BLUE
rd 1:1
These are commands Im tryed.
!
address-family ipv4 vrf BLUE
neighbor 200.1.27.2 remote-as 500
neighbor 200.1.27.2 activate
exit-address-family
!
06-15-2020 08:10 AM - last edited on 12-21-2023 01:34 AM by Translator
The issue happens because you have not enable address-family ipv4 under vrf definition.
vrf definition BLUE
address-family ipv4
exit-address-family
Regards,
06-15-2020 11:48 AM
Great Harold Ritter,
I needed to configure this feature.
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: