09-14-2011 05:04 AM - edited 03-04-2019 01:36 PM
Hello guys,
we have two STM16 links to one ISP. The plan is to move from the Alcatel to the new Cisco router.
There are two static routes to the BGP neighbor with one BGP session. I am not sure how we should proceed on
the Cisco router. I have never seen a BGP setup with two static routes on any Cisco BGP implementation.
Should we use two static routes to one BGP neighbor or two BGP sessions to two BGP neighbors (different IP addresses)?
Is it better in this case to have a peering with the directly connected IP address or a loopback on the ISP side?
09-20-2011 04:00 AM
In this case the AS path prepend will not work, because we have iBGP peering (you and ISP use the same AS number). You could use MED (if your ISP looks at it of course) or conditional route advertising with BGP.
HTH.
Arber.
09-21-2011 03:46 AM
Hi Arber ,
I think I confused you guys , same as means both links are terminated on same AS no on ISP side .But ISP
as and customer AS numbers are diffrent .
I tryied below link config where i used static routes beween ISP and customer with highet AD value to
achive redundancy .please let me know if this will work here in practical env also as I checked this on GNS
.
http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a00800945bf.shtml#co
nf2
my cust BGP config which has to be shifted on one ISP -
------------
router bgp 99
bgp log-neighbor-changes
neighbor 119.26.12.7 remote-as 95
neighbor 119.26.12.3 description *** eBGP peering with SIFY ***
neighbor 119.26.12.3 version 4
neighbor 119.26.12.3 timers 10 30
neighbor 125.2.6.85 remote-as 94
neighbor 125.2.6.85 description ***BGP Peering with Bharti***
neighbor 125.2.6.85 version 4
neighbor 125.2.6.85 timers 10 30
!
address-family ipv4
neighbor 119.26.162.3 activate
neighbor 119.26.162.3 soft-reconfiguration inbound
neighbor 119.26.162.3 prefix-list incoming in
neighbor 119.26.162.3 route-map Sifynet out
neighbor 125.22.36.8 activate
neighbor 125.22.36.8 weight 65000
neighbor 125.22.36.8 soft-reconfiguration inbound
neighbor 125.22.36.8 prefix-list incoming in
neighbor 125.22.36.8 route-map Bharti out
no auto-summary
no synchronization
network 202.2.116.0 mask 255.255.254.0
network 202.2.116.0
network 202.2.117.0
exit-address-family
# pls dont trust on Ips here , i changed it .
Thanks
----------------------
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide