Hello there we ordering boost performance trial license. And the license state was not in use after reboot.
At first install i was wrong because my image is older 16.03.07 and then i upgrade my image to newer fuji 16.09.05
and the license installation was successful
license install bootflash:booster.performance.lic
Installing licenses from "bootflash:booster.performance.lic"
Installing...Feature:booster_performance...Successful:Supported
1/1 licenses were successfully installed
0/1 licenses were existing licenses
0/1 licenses were failed to install
Feature name Enforcement Evaluation Subscription Enabled RightToUse
appxk9 yes yes no yes yes
uck9 yes yes no yes yes
securityk9 yes yes no yes yes
ipbasek9 no no no yes no
FoundationSuiteK9 yes yes no yes yes
AdvUCSuiteK9 yes yes no yes yes
cme-srst yes yes no no yes
hseck9 yes no no no no
throughput yes yes no no yes
internal_service yes no no no no
booster_performance yes no no no no
Index 11 Feature: booster_performance
Period left: 8 weeks 4 days
Period Used: 0 minute 0 second
License Type: Evaluation
License State: Active, Not in Use, EULA accepted
License Count: Non-Counted
License Priority: Low
show running-config | include throughput
platform hardware throughput level boost
show platform hardware throughput level
The current throughput level is unthrottled
I thought it was good and after reboot the license supposed to be activated. But after reboot the show license feature is still not enabled for boster performance in show running-config | include throughput this command is gone platform hardware throughput level boost.
Is there anything im missing or not aware of? Please kindly help.
Thank you,
Dwi