11-13-2007 06:38 PM - edited 03-03-2019 07:32 PM
%EM_FPGA-1-FPGA_RING_FULL: FPGA buffer descripter is full..... Hi I am continuously getting the above error log in cisco router. What could be the possible issue? any idea? I tried with output interpretur but not so effective...
11-13-2007 07:19 PM
Hi Prasad, I was precisely reading on this today, not exactly on the system error you are getting but rather "input error " on interface stats, read this link which will give you a better picture of router buffers and how it is used in addition to tuning up system buffers, take a look at your routers interfaces "input errors" , this link will help you understand it better.
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a00800a7b80.shtml
Rate any helpfull post
Rgds
Jorge
11-13-2007 07:58 PM
Prasad, my appologies , I may have spoken to soon.. I did a search for this error message fruther along with what entails %EM_FPGA error codes and seems to be related with encryption or along those lines, I suggest if you have smarnet to open up TAC case as there is not much information provided in more depth.
Rgds
Jorge
11-13-2007 08:03 PM
Hi,
Thanks for the update. The small session mentioned in the Above link is the message you will get from output interpreter. SO i think its time for TAC... Thank u so much for providing the updates
11-13-2007 08:08 PM
You're welcome, let us know the outcome with TAC.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide