02-14-2013 03:51 AM - edited 03-04-2019 07:01 PM
Cisco router 3945 when unpacked from the box and powered on , it was not able to find boot loader image and booted in ROMMON mode. tried to boot from the external flash and tftp but still not able to.
Does anyone faced the similar problem and know whats the solution for the same.
we repalced router chasis 2 times and both the times faced the same problem.
02-14-2013 02:53 PM
Can you please post the entire bootup process?
02-15-2013 12:29 AM
Hi leo,
ERROR: No memory detected! Stop.
System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2010 by cisco Systems, Inc.
ERROR: No memory detected! Stop.
System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2010 by cisco Systems, Inc.
ERROR: No memory detected! Stop.
System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2010 by cisco Systems, Inc.
Total memory size = 1024 MB - DIMM0 = 512 MB, DIMM1 = 512 MB
CISCO3945-CHASSIS with C3900-SPE150/K9 with 1048576 Kbytes of main memory
Main memory is configured to 72/72(dimm 0/1) bit mode with ECC enabled
This is what I have, Also everythign is tried, also tried with different version of IOS releases for 3945 but still the same.
02-15-2013 01:08 AM
ERROR: No memory detected! Stop.
Can be mislodged ot bad memory module. Or, can be the the NPE module faulty.
02-15-2013 01:43 AM
Cisco router 3945 when unpacked from the box and powered on ,
I'm going to agree with Paolo. You may need to return the 3900 router to Cisco (class as Dead On Arrival). Either the memory has jarred loose or the memory is faulty.
02-15-2013 01:48 AM
Thanks Paolo and leo for reply, But there were 2 new chasis both had the same problem.
Anyways its the third time we will be askign for new chasis hope that is ok :-)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide