09-09-2024 12:51 PM
How do I turn on the feature that let me configure "isakmp" so I can configure a cypto profile. I have tried everything that google has to offer, and nothing works.
Solved! Go to Solution.
10-04-2024 06:04 PM
I thank everyone for their input, I think the solution was, I was using the NPE version of the IOS once I changed to the none NPE I was able to issue all the commands.
09-09-2024 01:15 PM - edited 09-09-2024 01:49 PM
Hello @Robert Plunkett
Which license have you got ?
Please do that command
boot level Network-Advantage addon dna-advantage
Save and Reboot the C8300.
That should enable ipsec.
09-10-2024 04:11 AM
The license I have is 17.14.01a.
09-10-2024 04:14 AM
That did not work for me.
09-09-2024 01:31 PM
Hello
you need to enable it within the licencing, save changes and reload rtr, then you should have the crypto options available .
conf t
license boot level network-advantage addon dna-advantage
do wr mem
reload
09-10-2024 04:13 AM
When I contacted cisco TAC they said the license subscription we have is plug-n-play, how, do I enable it?
09-10-2024 04:21 AM
What is relate of isakmp and ipsec profile
What you try here ?
MHM
09-10-2024 04:25 AM
Good morning,
I am trying to create a crypto policy to be attach to a tunnel, however, when I type "crypto" no entry is availble for "isakmp".
09-10-2024 04:57 AM
Are router accept crypto map?
MHM
09-10-2024 06:08 AM
Hello
@Robert Plunkett wrote:
When I contacted cisco TAC they said the license subscription we have is plug-n-play, how, do I enable it?
Have you tried running that command I suggested?
09-10-2024 06:15 AM
Yes, I have tried, and I have tried all that google had to offer.
09-10-2024 06:38 AM - edited 09-10-2024 06:39 AM
Hello
then it sounds like your licencing isnt correct. probably you have network essentials ( like the old ipbase ) which isnt applicable for crypto.ipsec etc...
09-10-2024 06:45 AM
Does that mean I should download a different version of the ios?
09-10-2024 07:39 AM
Hello
no you'll probably need to obtain a network advantage licence
can post the output of the following please off your rtr:
sh version | in Soft|Lic