07-22-2015 03:54 AM - edited 03-05-2019 01:55 AM
Hi can I use the dual purpose ports on this Switch model as uplinks ports to another Switch?
All I want to do is plug in a Cat 5 cable into on of the ports on the front and link it to another switch.
I take it that the ports about are SFP module types.
I have attached an image of the front panel.
Thanks
Solved! Go to Solution.
07-22-2015 04:06 AM
sure you can, that's what these ports are build for. But for each uplink port, you can only use the TP or the SFP-port, not both at the same time.
07-22-2015 04:06 AM
sure you can, that's what these ports are build for. But for each uplink port, you can only use the TP or the SFP-port, not both at the same time.
07-22-2015 05:53 AM
Thanks.
I will use one of them and see how I get on.
I inherited the switch and I don't want to mess it up.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide