cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
557
Views
0
Helpful
5
Replies
Highlighted
Beginner

Can PBR works with backup wan interface or not?

Hi all,

pls confirm if pbr can works w/ backup wan interface or not. my current senario is:

the router have 2 wan interface, if I config PBR on it to rout traffics to wan 1 and 2 based on port selection.Can I config those 2 wan interface(w vpn) to backup each other?

such like:

port 25/110 goes to wan1

port 80/443 goes to wan 2

if wan 1 is down, all traffics goes to wan 2, vice versa.

deeply thanks!

(I've config wan 2 to work as a backup wan interface now.)

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Rising star

Re: Can PBR works with backup wan interface or not?

Hello,

With PBR  you can configure object tracking by which if interface will be tracked down for line protocol and

your traffic will move to back up.

Please go through below doc for more information

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gtpbrtrk.html

Regards

Mahesh

View solution in original post

5 REPLIES 5
Highlighted
Rising star

Re: Can PBR works with backup wan interface or not?

Hello,

With PBR  you can configure object tracking by which if interface will be tracked down for line protocol and

your traffic will move to back up.

Please go through below doc for more information

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gtpbrtrk.html

Regards

Mahesh

View solution in original post

Highlighted
Advisor

Re: Can PBR works with backup wan interface or not?

Hi,

I've config wan 2 to work as a backup wan interface now.

you mean configure backup command under interface?

Regards.

Alain.

Don't forget to rate helpful posts.
Highlighted
Beginner

Re: Can PBR works with backup wan interface or not?

Hi, I'll try it out, thanks!

Highlighted
Beginner

Re: Can PBR works with backup wan interface or not?

thanks for reply, the senario is:

such like:

port 25/110 goes to wan1

port 80/443 goes to wan 2

if wan 1 is down, all traffics goes to wan 2, vice versa.

Highlighted
Advisor

Re: Can PBR works with backup wan interface or not?

Hi,

port 25/110 goes to wan1

port 80/443 goes to wan 2

if wan 1 is down, all traffics goes to wan 2, vice versa.

so people accessing smtp/pop3 go via wan1 and people accessing http/https go via wan 2 ?

if wan1 is down then everythin goes via wan 2. only static routing no BGP?

Regards.

Alain.

Don't forget to rate helpful posts.