I have recently added a vMX to our AutoVPN (using the marketplace template process). The vmx is online, and its subnet is available via AutoVPN. I am not a networking expert, so the details below may be somewhat non-technical.vMX WAN uplink:172.16....
Forum Posts
Hi everyone,I'm facing an issue with inbound traffic arriving through a Non-Meraki Site-to-Site IPsec VPN.Site-to-site outbound firewall: Outbound rules from normal firewall rules: Environment:Cisco Meraki MX at the Main Site.Non-Meraki IPsec VPN to...
I have few questions regarding Cisco Cloud onRamp for Multicloud deployment with Azure vWAN:Can one vWAN contain two vHubs in the same Azure region, each with its own C8000V pair (Cloud Gateway)? Is the second hub managed by Cloud onRamp, or only dis...
We are using ASR1000 for OTV DCI Layer2 Extension between DC with DR but ASR1000 will be EOS in next year.So Can we using Cisco Catalyst C9300X-12Y-A for Replacement ASR1000 and convert OTV DCI Layer2 Extension to VXALN for Layer2 Extension between D...
How I can check C8300 Secure Router Feature ? as I unable to find on Cisco Navigate Feature.
Dear All, can someone please suggest me a free NetFlow analyzer to monitor the traffic utilization of ISR 4K series router.
A transformação digital exige redes cada vez mais escaláveis, seguras e distribuídas. A arquitetura Cisco Catalyst SD-WAN é uma solução para simplificar o gerenciamento da infraestrutura WAN, facilitando a conectividade entre as filias e datacenters,...
Currently have a support case open with Meraki but just wondering if anyone else had an issue similar to mine.So we have an MX85 in our Data Centre and an MX85 at our head office, both running absolutely fine on MX19.2.8. Upgraded to MX26.1.7.1 on S...
I'm setting up a brand new 8300-1N1S with UCS-E160S-M3. I can get into CIMC of the blade but can't login on ESXI on the KVM. I've tried several passwords for the root account but none works. Tried these:cisco123Cisco123Passwordpasswordc!SCo123passwor...
Resolved! IPsec and IKEv2 Starlink issues
Hi guys, I have been troubleshooting a router that is on a plane. It provides ISP with absolutely no issues. However, my Cisco router has a GRE Tunnel with IPsec tied to it. I found that while flying, Starlink will change your IP almost instantly. Wh...
I was just thinking about how in the early 2000's when I was just a wee little lad (like 18), I wonder a pallet full of Cisco AGS, MGS, IGS, and CGS routers for $1. It cost over $100 to ship it, but it was awesome. I tried using them to study, but ev...
So, I was practicing TLOC extension at my SD-WAN lab on EVE-NG and I spent around 4 hour to troubleshoot this strange issue. The issue is directly connected subinterface cannot ping each other. They are both connected to GigabitEthernet4 physical int...
Hello,I came across a Cisco lab where the following ACL needed to be configured to protect SRV:Applied ACL at R3:!interface Ethernet0/2ip address 192.168.3.3 255.255.255.0ip access-group out-to-srv outip access-list extended out-to-srvpermit tcp host...
We have a MX85 HA pair,WAN1, is set as primary for all VLAN's besides Guest4 times now we have had an issue where the network goes 100% lights out besides the VLAN hard set on WAN2.At first, we thought it was the switch, which is ruled out, but lead ...
Cant get SDWAN to push a template. I get the error "Ping to Validator 192.168.12.171 from GigabitEthernet1 FAIL" Edge11 has vbond ip configured as 192.168.255.171. I have also added static routers in the feature template...
