CBWFQ query

[marcusbrutus]

Hi Experts,

Just wish to clarify something.

Say I have a 10 Mbps link.  And I allocated 3 Mbps to EF (LLQ) and allocated 60% bandwidth remaining to class TEST and 20% bandwidth remaining to class default, what happens to the remaining 20%?  I was told that this remaining 20% is proportionally distributed to each class.  So given the proportion of both classes (TEST = 60/80=3/4 and default 20/80=1/4), 3/4 of the unallocated remaining 20% goes to TEST and 1/4 of the unallocated remaining 20% goes to default.  Is this correct?

[Joseph W. Doherty]

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

If TEST is allocated 60% and default 20%, they will proportion bandwidth 60:20 or 3:1.  (The scheduler sets weights, based on assigned bandwidth allocations, and it dequeues packets by their relative weights.)