11-23-2009 08:14 AM - edited 03-04-2019 06:47 AM
Hey all.
I am configuring a 7204 with two DS3 circuits that are being channelized into 28 T1s each. I want to make sure I have them configured correctly before I start turning up circuits.
I have done research but connot find anything for multiple DS3s and creating multiple channel groups on one router.
Correct me if I am wrong but can I just create two channel-groups, one for each card. I know T1s have 24 timeslots. Should this work?
Again I have little experience configuring these circuits. I am going by my research.
controller T3 1/0
framing m23
cablelength 450
t1 1 channel-group 0 timeslots 1-24
t1 2 channel-group 0 timeslots 1-24
t1 3 channel-group 0 timeslots 1-24
t1 4 channel-group 0 timeslots 1-24
t1 6 channel-group 0 timeslots 1-24
t1 7 channel-group 0 timeslots 1-24
t1 8 channel-group 0 timeslots 1-24
t1 9 channel-group 0 timeslots 1-24
t1 10 channel-group 0 timeslots 1-24
t1 11 channel-group 0 timeslots 1-24
t1 12 channel-group 0 timeslots 1-24
t1 13 channel-group 0 timeslots 1-24
t1 14 channel-group 0 timeslots 1-24
t1 15 channel-group 0 timeslots 1-24
t1 17 channel-group 0 timeslots 1-24
t1 18 channel-group 0 timeslots 1-24
t1 19 channel-group 0 timeslots 1-24
t1 20 channel-group 0 timeslots 1-24
t1 21 channel-group 0 timeslots 1-24
t1 22 channel-group 0 timeslots 1-24
t1 23 channel-group 0 timeslots 1-24
t1 24 channel-group 0 timeslots 1-24
t1 25 channel-group 0 timeslots 1-24
t1 26 channel-group 0 timeslots 1-24
t1 27 channel-group 0 timeslots 1-24
t1 28 channel-group 0 timeslots 1-24
controller T3 2/0
framing m23
cablelength 450
t1 1 channel-group 1 timeslots 1-24
t1 2 channel-group 1 timeslots 1-24
t1 3 channel-group 1 timeslots 1-24
t1 4 channel-group 1 timeslots 1-24
t1 6 channel-group 1 timeslots 1-24
t1 7 channel-group 1 timeslots 1-24
t1 8 channel-group 1 timeslots 1-24
t1 9 channel-group 1 timeslots 1-24
t1 10 channel-group 1 timeslots 1-24
t1 11 channel-group 1 timeslots 1-24
t1 12 channel-group 1 timeslots 1-24
t1 13 channel-group 1 timeslots 1-24
t1 14 channel-group 1 timeslots 1-24
t1 15 channel-group 1 timeslots 1-24
t1 17 channel-group 1 timeslots 1-24
t1 18 channel-group 1 timeslots 1-24
t1 19 channel-group 1 timeslots 1-24
t1 20 channel-group 1 timeslots 1-24
t1 21 channel-group 1 timeslots 1-24
t1 22 channel-group 1 timeslots 1-24
t1 23 channel-group 1 timeslots 1-24
t1 24 channel-group 1 timeslots 1-24
t1 25 channel-group 1 timeslots 1-24
t1 26 channel-group 1 timeslots 1-24
t1 27 channel-group 1 timeslots 1-24
t1 28 channel-group 1 timeslots 1-24
Thanks for your help!
Solved! Go to Solution.
11-23-2009 08:19 AM
Yes. You can reuse channel-group 0 for both, because the interface ID will discriminate anyway.
11-23-2009 08:19 AM
Yes. You can reuse channel-group 0 for both, because the interface ID will discriminate anyway.
11-23-2009 08:42 AM
Cool.
Thanks a bunch!
11-23-2009 09:12 AM
No problem. Thank you for the nice rating and good luck!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide