04-10-2006 02:53 AM - edited 03-03-2019 12:21 PM
Hi, can anybody suggest..
when i connect consol of cisco 1721 Router.
the display is in junk like ..
2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}2}
2}2}2}2}2}
I could not able to see anything.. setting on hyper terminal are default like
bits :9600
data bits: 8
parity :None
stops bits: 1
flow control :none
Thanks
04-10-2006 02:58 AM
Hi,
It's possible that the router's console settings have been changed. You might want to try a range of baud rates on your terminal emulation program starting from 19200....
Pls do remember to rate posts.
Paresh
04-10-2006 09:48 PM
hi paresh.
Thanks for reply. i tried with all b-rates on terminal program but no response. everytime i change different output like
òý z ý y! _ «ú rýä ëüýd ÷ýý÷ ýòb ý ýë ýrz b ÷ýz ýë ý
give some another solution please. looking for early reply
Thanks. bye
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide